2016-04-22 20:21
bending翻译
弯曲
音标读音
英式:['bendɪŋ]美式:['bendɪŋ]
基本意思
n.弯曲(度),挠度
v.(使)弯曲,屈身( bend的现在分词 );(使四肢等)弯曲;(使)拐弯;把…弄弯(或折起)
形近的词
变形
例句
- Elasto-Plastic bending and torsion;
弹塑性弯曲和扭转;
- She'd cut a jagged hole in the tin, bending a knife in the process.
她在罐头上曲里拐弯地划了个口,其间还弄弯了一把小刀。
- He was bending over the desk, drawing.
他正趴在桌子上画图。
- One of the method of curbing plate bending in jobbing sheet rolling process was researched.
研究了在中板轧制过程中抑制板坯弯曲的措施之一。
- The study of torsional vibration and bending and axial vibration of crankshaft system are summarized in this paper.
简单综述了内燃机曲轴扭振、弯振和纵振的研究内容及相关方法。
- In a beam type compensator a stress pattern produced by pure bending is frozen into the material.
在梁式补偿器中,其应力光图是由纯弯曲产生而被冻结在材料之中。
- Without a word spoken, he hurried away, with his hoary head bending low.
他什么也没说,低着白发苍苍的头,匆匆地走了。
- The bending curve of the work roll was obtained.
得出了工作辊的挠度曲线;
- He was fed up with people bending his ear about staying on at school.
人们一个劲儿地跟他说要继续留在学校念书,这让他烦透了。
- The recurrence formula for beam transform in bending was deduced.
推导了求梁的变形的递推公式并对其应用方法做了说明。
- Some of the loads include tensile, shear and bending.
这些载荷包括:拉伸,剪切和弯曲。
- The paper studied elastic-plasticity bending deformation of cross-section of unsymmetrical beam and found a solution of deformation.
对一般非对称截面梁的弹塑性弯曲变形进行了讨论,并通过分析得到了一近似种求解方法。
- Lu Xun was loyal to the people, bending his back to the task until his dying day.
鲁迅对人民忠心耿耿,鞠躬尽瘁,死而后已。
- The general bending of moderately thick circular plate on an elastic half-space was investigated.
本文对各向同性弹性半空间地基上中厚度圆板一般弯曲问题进行了系统的分析。
- The temperature and the deformation fields of the forming process were calculated and the final bending angle was predicted.
计算了弯曲成形过程的温度场及变形场,预测了钢板的最终弯曲角度。
- Adding GF increased not only tensile strength and bending modulus but also impact strength of the composite.
GF的加入不但提高了材料拉伸强度、弯曲性能,而且提高了其冲击强度;
- Rick appeared, bending his head a little to clear the top of the door.
里克到了,进门时为了避开门楣稍微低了下头。
- High bending fatigue strength and contact fatigue strength are needed for heavy duty gear steels.
重载齿轮钢要求具有高的弯曲疲劳强度和接触疲劳强度。
- The bird was enclosed in such a small space that it could not turn without bending its tail.
小鸟被关在这么狭小的空间里,不弯一下尾巴的话,都转不过身来。
- But in the operation of the curved box-girder, bending and torsion deformation has also been quite pronounced.
但在运营中遇到的弯箱梁弯扭变形问题也比较突出。
- Can a bending load makes both compressive and tensile stress in a member?
弯曲载荷可以对一个物件同时产生压缩应力和张应力么?
- The effect of sintering technology of mullite on its bending strength was studied systematically.
系统研究了合成莫来石烧结工艺对其抗弯强度的影响。
- Stiffness: It is a measure of the bending strength of paper and board.
挺度:挺度是衡量纸和纸板耐弯曲的强度性能。
- Two kinds of welded joint have good crack resistance, impact toughness, stretching and bending performance.
两种焊接接头都具有良好的抗裂性能、冲击性能、拉伸和弯曲性能。
- Bending behaviors of functionally gradient piezoelectric curved cantilever was studied.
摘要研究了弯曲型梯度功能压电悬臂梁的弯曲特性。
- The calculation of bending deflection is always required in analyzing stiffness of the continual beams.
工程实际中,常采用各种形式的连续梁,对连续梁进行刚度分析时,需要计算其弯曲变形。
- The effect of axial deformation of columns and bending stiffness of connecting beams are taken into account.
本文考虑框架柱子轴向变形的影响和剪力墙之间连梁的作用。
- Laminate techniques and wood bending are taught, depending on the design needs of the class.
层压技术和木材弯曲技术的讲授,将取决于班上学生设计的需要。
- In this paper boundary integral method is generalized to solve the problem of bending of heavy camber cantalever beam.
采用边界积分法求解了大挠度悬臂梁的弯曲问题,给出了求解大挠度悬臂梁的解析解的新方法。
- Find the value of the bending stress and the deflection at the center if the ribs are omitted.
如果略去肋条,求中心处的弯曲应力和挠度之值。
百科解释
网络意思
压音
推弦
弯腰
弯曲力