2016-05-14 23:55
boride翻译
硼化物
音标读音
英式:['bɔ:raɪd]美式:['bɔ:raɪd]
基本意思
n.硼化物
形近的词
变形
例句
- This paper deals with the crevice structure in boride layer.
对渗硼层中的夹缝组织进行了分析研究。
- The results show that heat treating structure is high-tenacity low-carbon martensitic matrix and high-hardness eutectic boride.
结果表明，淬火热处理组织为高韧性低碳马氏体基体+高硬度共晶硼化物相。
- The preparation of ternary boride hard alloy cladding layer on steel substrate is studied.
研究采用铸渗法制备三元硼化物硬质合金覆层钢基材料。
- Boride series of main products: boric acid, borax, and so on.
硼化物系列主要产品有：硼酸、硼砂等。
- Boride Ceramic Composite Materials Research and Prospects
硼化物陶瓷复合材料的研究进展与前景展望
- The phase structures of the surface and sub-surface of the boride layer were analyzed using X-ray diffraction ( XRD).
用X射线衍射仪（XRD）对渗层的表面和次表面相结构进行了分析；
- Using scanning electron microscope observation comparison carbonization boride cermet processing surface elastic performance and processing surface deterioration level.
利用扫描电镜观察、比较碳化硼陶瓷加工表面弹性性能及加工表面变质层。
- The abrasion and scuffing behaviour of Ni-base spray-welded coating containing WC by oxygen-acetylene was studied and compared with those of boride layer using a MM200 wear tester.
利用MM200型磨损试验机研究了氧-乙炔焰镍基碳化钨喷熔层的磨粒磨损和抗咬合特性，并与硼化物层进行了比较。
- Study on Microstructure and Property of Boride Carbide Reinforced Ni-based Composite Coatings Produced by Laser Cladding
激光熔覆碳化硼增强镍基复合层组织与性能研究
- The thickness, microstructure, phase structure and hardness of boride layer in different processes have been analyzed.
对不同工艺下所形成的渗硼层的厚度、组织、相结构和硬度进行分析。
- In-situ synthesis of Mo-Ni-B ternary boride cladding
原位反应合成Mo-Ni-B系三元硼化物熔覆层的研究
- There are four grain refinement mechanisms in hypoeutectic AlSi casting alloys: peritectic reaction theory, eutectic reaction theory, boride particles theory, and hypernucleation theory.
对于亚共晶Al－Si铸造合金，归纳起来有四种晶粒细化机理：包晶反应理论、共晶反应理论、硼化物颗粒理论和超形核理论。
- Abstract: Using liquid phase sintering technique, ternary boride cermet clad material was prepared, and have good properties as lower cost, high wear resistance, high corrosion resistance.
摘要：采用液相烧结技术制备的三元硼化物基金属陶瓷覆层材料具有成本低廉、耐磨抗蚀的优异性能。
- To improve the anti-corrosion property of low carbon steel in zinc melt, the iron boride is synthesized on the surface of the low carbon steel with solid bonding processing.
为提高低碳钢的抗锌蚀能力，采用固态渗硼工艺在低碳钢的表面形成了致密的铁硼化合物保护层。
- Result shows: there are twin in the boride layer and dislocation network in ferrite of the trasitional region; distance between lamellae of pearlite is reduced and some cementites are broken.
结果表明，磨损表层的硼化物中产生孪晶和层错，过渡区的铁素体中产生位错网，珠光体片层间距变小，部分渗碳体碎化。
- Microstructures of carbide and boride reinforced respectively titanium alloy matrix composites by different fabrication methods were reviewed.
论述了不同制备方法中分别以碳化物和硼化物为增强相的钛基复合材料的微观组织。
- Behavior Analysis of Interface Between Ternary Boride Cladding and Steel Matrix by Casting-infiltration
铸渗法制备三元硼化物硬质覆层-钢基体界面特性的分析
- Sintering process and microstructure of Corundum/ Mullite Zirconium Boride ceramics at normal pressure is studied.
研究了常压条件下刚玉／莫来石&硼化锆陶瓷材料的烧结工艺及其显微结构。
- A ternary boride cermet clad material was fabricated on the Q235 steel substrate by means of the vacuum liquid phase sintering technique.
采用真空液相烧结法，在Q235钢表面制备三元硼化物基金属陶瓷覆层材料。
- The results show that, in the given conditions, the microstructure of boronizing layer is dense, boride wedged base in the shape of spider, which combines with base firmly;
结果表明：在给定实验条件下，渗硼层组织致密，硼化物呈针齿状楔入基体，与基体结合牢固；
- Coating's hardness becomes high with an increase of carbide and boride.
随着涂层中碳化物或硼化物的增多，涂层硬度提高。
- Research indicates that metal boride nanocomposites have richness, interesting structure and excellent physical, chemical properties.
理论和实验结果表明金属硼化物纳米材料具有丰富有趣的结构形态和优异的物理化学性能。
- The coated H13 steel from ternary boride cermet with HV value of about 1000 at temperature of 700 ℃ exhibited very high thermal strength.
H13钢表面三元硼化物基金属陶瓷覆层在700℃时，HV值保持1000左右，具有很高的热强性。
- Solidification structures and boride refine obviously with the increase of solidification cooling speed.
随着凝固冷却速度增加，凝固组织和硼化物明显细化。
- The influence of alloy ingredient on corrosion resistance of ternary boride cermet clad materials was studied.
研究了合金组分对覆层材料耐腐蚀性的影响。
- Analysis of DTA/ TG Curve of Wood Flame Retardant of Inorganic Boride Series
木材无机硼系阻燃剂DTA/TG曲线解析
- Boron and boride have been widely applied to modern industry.
硼及其硼化物在现代工业中有着广阔的应用前景。
- Chromium and Health Chromium boride has been obtained by salt-bath boriding on chromium electroplated 45 carbon steel.
对45钢表面电镀硬铬层后，在熔渣中向45钢表面的电镀硬铬层渗硼获得了硼化铬覆层。
- Qinghai Ridge Boron& Lithium Co., Ltd, certificited in 2000, is a aggregate resource corporation of mining boron mine, producing boracic acid, boride re-processing and selling Industrial used salt.
青海中天硼锂矿业有限公司成立于2000年，是集硼矿开采、硼酸生产、硼化物深加工、工业用盐生产销售的资源性企业。
- Change of K3 superalloy joint microstructure especially boride phases was investigated in this paper. The function and adding method of alloy powder were also discussed.
主要研究了K3合金钎缝中加入合金粉后组织的变化，尤其是硼化物的变化，并讨论了合金粉的作用和加入方式。
百科解释
网络意思
必宝
必宝油石
美国必宝
美国