2016-06-03 06:10
ebonite翻译
硬橡胶
音标读音
英式:['ebənˌaɪt]美式:['ebənˌaɪt]
基本意思
n.硬橡胶，硬化橡皮，硬橡皮
形近的词
变形
例句
- Standard Test Method for Determining Temperature of deflection of Plastics and Ebonite Under Load
负载情况下塑料和硬橡胶偏转温度测定的标准试验方法
- Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards.
模压和捏造硬橡胶和软橡胶以及手工制作的橡胶制品产品展示与硫化技术，检测和检查，测量和标准以及。
- Plastics-determination of temperature of deflection under load-part 2: plastics and ebonite
塑料.载荷下挠曲温度的测定.第2部分：塑料和硬橡胶
- Study on adhesion of ebonite to steel substrate for anti-corrosion lining
防腐衬里用硬质胶与钢基体粘合的研究
- Ebonite-determination of tensile strength and elongation at break
硬质橡胶拉伸强度和拉断伸长率的测定
- Tolerances applicables to moulded and extruded products of rubber or ebonite
橡胶或硬橡胶的模制和压制产品的适用公差
- Ebonite& Determination of tensile strength and elongation at break
GB/T1701-1982硬质橡胶抗张强度和扯断伸长率的测定
- Ebonite& Method of test for shearing strength
GB/T1700-1982硬质橡胶抗剪切强度试验方法
- Hence, ebonite is in fact one kind of thermosets.
因此，硬质橡胶实质上是一种热固性塑料。
- Plastics and ebonite-determination of indentation hardness by means of a durometer shore hardness
塑料制品和硬橡胶.用硬度计测定压痕硬度
- Ebonite-determination of crushing strength
硬质橡胶压碎强度的测定方法
- Ebonite-determination of shearing strength
硬质橡胶抗剪切强度的测定
- Ebonite fixed wide wheel industrial caster.
硬橡胶固定肥仔轮。
- As a kind of special purpose rubber products, ebonite has been widely used as anticrrosive lining and insulative articles for its outstanding chemical and electrical properties.
硬质橡胶作为特种橡胶制品的一种，因其优异的耐化性和绝缘性，目前仍广泛应用于防腐衬里等耐化学品材料以及绝缘材料中。
- Ebonite& Determination of cross-breaking strength
GB/T1696-1981硬质橡胶横向折断强度的测定方法
- Hard rubber ( for example, ebonite) in all forms, including waste and scrap; articles of hard rubber.
各种形状的硬质橡胶（例如纯硬质胶），包括废碎料；硬质橡胶制品；
- The results showed that the crosslink structure in SBR ebonite compound was predominant at the early stage of vulcanization;
结果表明，在硫化反应前期，硬质SBR胶料中交联结构起主导作用；
- Ebonite& Determination of hardness by means of a durometer hard rubber bead
GB/T1698-1982硬质橡胶硬度的测定
- Structure and Properties of Ebonite
硬质橡胶的结构与性能
- The crosslink structure reduced, and the modification of rubber by polar sulfur ring was predominant resulting in plastics-like SBR ebonite at the middle and final stages of vulcanization;
在硫化反应中后期，胶料中交联结构减少，极性的硫环分子对橡胶改性起主导作用，从而形成具有塑料性质的硬质SBR；
- And as the curing time extended, the hardness, tensile strength and elastic modulus of SBR ebonite increased and its T_g rose significantly.
随着硫化时间的延长，硬质SBR的硬度、拉伸强度及弹性模量增大，玻璃化温度显著提高。
百科解释
网络意思