2016-04-27 23:42
boriding翻译
渗硼
音标读音
英式:[bɔ:'raɪdɪŋ]美式:[bɔ:'raɪdɪŋ]
基本意思
渗硼
形近的词
变形
例句
- The heat preservation time which will influence the boriding stratum is discussed primarily.
初步探讨了保温时间对45钢渗硼层的影响。
- The basic principle and specific process of eutectic melting boriding in salt bath are investigated initially in this paper.
对盐溶共晶化渗硼的基本原理和具体工艺进行了探讨。
- Research Actuality of Effect of Boriding on Microstructure and Properties of Steels Surface
渗硼对钢铁表面组织与性能影响的研究现状
- In this paper, the combined process of strengthening and toughening of steel T10A punch by spheroidization annealing and boriding quenching is presented.
对T10A钢冲头进行了球化退火加渗硼淬火复合强韧化处理。
- The influence of amount of graphite powder addition on the agglomeration of pack boriding agent with borax has been discussed.
探讨了石墨粉加入量对硼砂型固体渗硼剂结块的影响。
- Study on Pack Boriding for Steel 15MnV with Precoating Powder
15MnV钢预加涂层粉末渗硼的研究
- A Study of Combining Treatment of Boriding and Sulphurizing for Cold Work Die Materials
冷作模具材料渗硼+渗硫复合处理的研究
- The results showed that under the condition of boriding at low temperature wear resistance andcorosion resistance of boried layer were increased and its brittleness was reduced.
结果表明:低温渗硼层的耐磨性和耐蚀性较高温渗硼层的有所提高,而其脆性却有所降低。
- The experimental results show that a thicker penetrating layer of eutectic structure can be formed on the surface of workpieces in shorter time through eutectic melting boriding in salt bath.
结果表明,采用盐溶共晶化渗硼可在较短的时间内在工件表面形成较厚的共晶组织渗层,渗层硬度适中,表面光洁。
- The results showed that the boriding layer is even, and has less brittleness.
结果表明渗层组织致密、脆性低、硬度梯度平缓;
- In order to improve the properties of hot work steel H13 and prolong the working life of moulds, surface mechanical attrition treatment ( SMAT) was combined with plasma boriding.
为了提高热作模具钢H13的性能,延长模具的使用寿命,本试验将表面机械研磨(SMA)处理与等离子渗硼相结合。
- In conclusion, a preliminary comment on the microstructure of boriding layer is described.
同时,对渗硼层的显微组织进行了初步的探讨。
- With increasing the amount of carbon and alloying element in steel, the thickness of boriding layer reduces, the transition zone increases, and the needle like structure tends towards stability.
共渗层随钢中含碳量及合金元素的增加,厚度减少,过渡层增加,指针结构趋于平缓;
- Chromium and Health Chromium boride has been obtained by salt-bath boriding on chromium electroplated 45 carbon steel.
对45钢表面电镀硬铬层后,在熔渣中向45钢表面的电镀硬铬层渗硼获得了硼化铬覆层。
- The basic principle and technology of self propagating high temperature boriding and eutecticum have been preliminary discussed.
初步探讨了自蔓延高温渗硼共晶化的基本原理及具体工艺。
- The changes of the phase and thickness of the boriding layer for different holding time are investigated.
研究了经过不同时间加热后渗硼层深度的变化及物相变化。
- The test process design and optimum treatment were presented for studying composition of borax boriding agent.
介绍研制硼砂型固体渗硼剂的试验设计和最优化处理。
- The hardness of microwave boriding is higher than that of conventional boriding.
与常规渗硼渗层相比,微波渗硼的渗层硬度高、耐磨性好。
- Application of Experimental Optimum Design in Solid Boriding Agent
最优化试验设计在固体渗硼剂研究中的应用
- The activated boron atoms come from the boron atoms which decomposed by boriding medium and gaseous boride.
微波场下的渗硼层形成所需的硼原子来源于介质分解的活性硼原子和气态硼化物分解的硼原子。
- The influence of amount of wood coal addition on the agglomeration of pack boriding agent with borax has been discussed.
探讨了木炭粉加入量对硼砂固体渗硼剂结块的影响。
- Orthogonal Analysis of Boriding Process for 45 Steel
45钢渗硼工艺的正交分析研究
- Through the investigation of the component of the paste, a good boriding paste with lower cost and easy peeling has been obtained.
通过对膏剂渗硼剂成分的研究,获得了一种成本低、剥落性好的膏剂渗硼剂。
- A Study on the Technology of Pack Boriding with Borax
利用硼砂进行固体渗硼工艺研究
- Effect of Applied Electric Field on the Solid Boriding Process
外加电场对固体渗硼过程的影响
- Effect of Room Temperature Deformation on Rate of Boriding and Phase Construction of Surface Layers Borided
室温变形对渗硼速度和硼化物层相结构的影响
- Effects of heat stress and structural stress on peeling off of the boriding layer
热应力组织应力对渗硼层剥落的影响
- The pump barrel is treated with a special boriding technology and the plunger is coated with nickel alloy, therefore the pump has excellent corrosion-and wear-resistance.
为此,设计了一种适用于大斜度井和水平井的新型斜井抽油泵。这种泵的泵筒采用特殊的固体渗硼工艺,柱塞采用热喷焊镍基合金工艺,防腐且耐磨性优越;
- Study of Boriding in Vacuum Ion Liquid and Gaseous Phases
真空离子液-气相渗硼的研究
- Effect of Laser Melting on Eutecticum of Boriding Layer on Steel
激光熔化对渗硼组织共晶化过程的影响
百科解释
网络意思
硼化